Order number 01228 Item No. 01228

Model BSL Type Silencer

Material Copper/semi-copper Scope Applicable pipe fittings Temperature resistance -20——60(°C)

Withstand voltage 1 (MPa) Mounting form Semi-copper, all copper Pipe diameter M5 M5 thread, 01 G1/8 1 point thread, 02 G1/4 2 points thread, 03 G3/8 3 points thread, 04 G1/2 4 points thread , 06 G3/4 6-point thread, 10 G1 1 inch thread, 1.2 inch, 1.5 inch, 2 inch (mm)

Note on the use of connectors:

1. It is necessary to confirm that the cut surface of the pipe is vertical, there is no scratch on the outer circumference of the pipe and the pipe is not oval.

2. When inserting the pipe, it must be inserted into the bottom of the joint. If the pipe is not inserted, it may cause air leakage.

3. After the pipe is installed, pull the pipe to confirm that the pipe cannot be pulled out.

4. Please do not use it for purposes other than fluids.

5, do not exceed the maximum use pressure when using.

6. Do not use outside the temperature range to prevent deformation of the sealing material, which may lead to leakage.

7, do not artificially hit, bend, stretch, to prevent damage.

8. Do not use it in places such as metal powder or sand dust. If it is attached, it will cause poor work or leakage.

Precautions when disassembling: Use a suitable tool and use the outer hexagon of the fitting to remove the fitting. It is necessary to remove the sealing material that adheres to the opposite side of the pipe joint. Otherwise the adhered sealing material may enter the peripheral components, causing malfunction.