Order number 01185 Item No. 01185

Model BD Type Silencer

Material Iron/Copper Scope Gas Pipe Connector Temperature -20——60(°C)

Withstand voltage 1 (MPa) Mounting form Hexagon socket iron, hexagon socket copper, hexagon socket copper Connector diameter 01 G1/8 1 point thread, 02 G1/4 2 points thread, 03 G3/8 3 points thread, 04 G1/2 4 Split thread, 06 G3/4 6-point thread, 10 G1 1 inch thread (mm)

First, the use of muffler

 The muffler, also known as the silencer, is the most widely used muffler and noise reduction device. A muffler is a device that prevents sound from propagating and allows airflow to pass through, and is an important measure to eliminate aerodynamic noise. The muffler is a noise-reducing device installed in an air flow passage of an aerodynamic device (such as a blower, an air compressor) or in an intake and exhaust system. The muffler blocks the propagation of sound waves and allows airflow through, making it an effective tool for controlling noise.

Second, the muffler structure advantages

 The main form of the venting exhaust muffler is a anti-jamming composite muffler and a small hole muffler. And has the following advantages:

 1. It adopts all-steel reinforced structure and can withstand long-term emission invariant under ultra-high pressure.

 2. The muffler is made of stainless steel and does not corrode.

 3. Multi-layer structure, can adapt to the concentrated noise reduction of high, medium and low frequency, and can adapt to high flow rate noise elimination requirements.

 4. The muffler has a separate drainage structure, which can meet the pipeline not collecting water. At the same time, it can also absorb the vertical and horizontal thermal displacement of the exhaust pipe to ensure the safety of the hot working of the exhaust pipe.

 When the user installs as required, the total noise reduction can reach 30 to 42 decibels. The noise reduction effect absolutely meets the requirements of the "Industrial Enterprise Noise Hygiene Standard".

Third, muffler purchase

 When ordering the exhaust muffler, the main consideration is performance and installation. Generally, the stainless steel material is used. The muffler structure is divided into a small hole type muffler and a composite muffler. The small hole type is light in weight and easy to install, and the composite type effect is good, so the following must be provided when ordering the muffler data:

 1. Exhaust pipe diameter and wall thickness.

 2, exhaust pressure, temperature

 3. Emissions.